A friend and I just had our rollers recovered from NA Graphics and we’re sitting here putting them back together and the gear will not line up where it is suppose to. It’s the same for both sets of rollers. We’ve tried each side and every roller trying to get the gear to line up. It seems like we need to cut the roller down but this seems odd because shouldn’t the specs be correct? Please help! I’d like to have the press up and running this weekend and NA Graphics is closed until Monday. What should we do? Thanks in advance! Amanda & Berwyn
Post Details
-
Post Title: Sp-15 form roller help!!
Author: aleeandpress
Filed As: Form rollers/gears, SP series
Tags:
You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
4 comments have been posted on “Sp-15 form roller help!!”.
Leave a Reply
You must be logged in to post a comment.
RotaDyne or Petco will provide rollers at spec. If you have to cut into the rollers to fit you have a major problem. Do not do this. Return the rollers.
Gerald
The roller needs to be square cut on the gear side. If the roller was sent with bevelled ends, then you do need to cut off some rubber, maybe just enought to square off one end. Use a sharp knife, but be very careful.
We are open 24 hrs a day, Try my cell at 970-387-5710 if I’m not in the office. A last name and/or press name would help me look up your account and order and see what was shipped you. Don’t start cutting away until we can figure out what the problem is.
Fritz/NA Graphics
While not ideal, cutting the length seems to be your only choice if you’re on deadline. You’ve probably already done it by the time you read this.