Our machine shop added two gears and linked them together. The link can be seen in the picture with yellow handle (to the right of the handle). The reason for the link is that the cylinder shifts position and gear and the handle needed to shift with it. It takes five and a half rotations on the handle to move the cylinder through one full print cycle. There is a little resistance to get it started, but once it’s going it practically goes on its own.
232P conversion to M a success!
Posted March 13, 2008 by Kate Ten Eyck 932 views 2 Comments
Print
Post Details
-
Post Title: 232P conversion to M a success!
Author: Kate Ten Eyck
Filed As: 232, Power Carriage
Tags:
You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
2 comments have been posted on “232P conversion to M a success!”.
Leave a Reply
You must be logged in to post a comment.
Great work! Please give us more photos!
Daniel Morris
The Arm Letterpress
Brooklyn, NY
That is very nice work, and it looks like some serious machining was needed. I assume the handle is turned clockwise? All the Vandercooks I’ve seen have the handle, at feedboard, at a 4 0′clock position. A slight downward push is all you need to get the cylinder started. With the handle at 9 o’clock as it is here, you have to push up, which must be a bit uncomfortable. If that handle isn’t pinned, try rotating it around and then starting may get easier.