Archive for October 2008

SP-15 roller height problems - Posted October 29, 2008

I have a couple of questions regarding roller adjustment on my SP-15. Recently when checking the roller height, I discovered that the ink stripe on the gauge was about twice as thick in the middle of both rollers than on the ends, leading me to think that the rollers are for some reason slightly sagging or bowing towards the middle (although this is not apparent when looking at them straight on). Secondly, when testing the roller height at different points along the bed, the height increases the further the carriage is rolled down the length of the bed. I’ve checked with a level in both directions and the readings say the press is not out of balance. These rollers came with the press so I’m not certain of their age, but they have no visible defects that I can see. I brought one along to a class I took with Paul several months back and he (and his durometer) were of the opinion that the roller was in very good condition. Any advice about how to correct either of these issues would be much appreciated. Thanks!
–Sylvia

Friction Fingers - Posted October 15, 2008

I’m looking for a set (2) of Friction Fingers for a Vandercook 32-28. If anyone has one or two please email me.

Thanks,

Casey
casey@inkylipspress.com

Sleepless in Savannah - Posted

Hello. I have been searching tirelessly for a Vandercook Proof Press (preferably #3 or #4, Universal or SP) in working condition to purchase for use in a printing job I am working on. I would greatly appreciate and advice or suggestions that I can get to help me find one.

Thank you.

-->