My Universal I Power carriage motor has been leaking oil for the three years I have owned it so I finally took it apart and fixed the leak. After reassembling the motor I filled it with oil but I am unsure how high the oil should be. Should I fill it to the screw on the front middle, #1, or the screw on the upper right, #2. Thanks in advance for any help.
Oil level on Universal I Power carriage motor
Posted July 13, 2009 by James Hendricks 1,052 views 2 Comments
Print
Post Details
-
Post Title: Oil level on Universal I Power carriage motor
Author: James Hendricks
Filed As: Motors, Universal series
Tags:
You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.
2 comments have been posted on “Oil level on Universal I Power carriage motor”.
Leave a Reply
You must be logged in to post a comment.
also, the oil level plug should have been, at one time, painted red, and the vent plug (where you fill) has a groove all the way around it’s head. I can see it on the topmost bolt in your pic. When they mounted these motors they would put the special plugs in the correct positions, as there are six ways the motors could be mounted on different machines.
It’s hard to tell, because the pic’s a little small, but #1 is your oil level plug and your vent plug is on top, unnumbered (between 1 & 2 in your pic). #2 is the oil level plug for another motor orientation. Good luck. -alex