I became the proud owner of a beautifull Vandercook SP20 this week. We moved it from Leiden in the Netherlands to Brussels on friday. The press is in reasonable condition I think, allthough before starting to operate it I would like to give it a decent cleanup, regrease and finetune all machine parts. Could Anyone [...]

I am happy to announce that I’ve been chosen to receive a Fulbright award to study Book Conservation at West Dean College in West Sussex England. I’ll be studying for two years, beginning September 2010. Community engagement and cultural exchange are integral parts of the Fulbright program, and accordingly I am looking to conduct free [...]

I’m sorry for having problems two days in a row, but here’s another phenomenon that I’m not understanding. These two drop caps (48-point Rondo) were printed one after the other – same lockup, same ink, same paper, same packing, same everything – yet the print quality is markedly different. What could have made the difference? [...]

Hello Vanderblog Friends, I’m hoping someone can help me solve a problem I’ve been having with ink being where it’s not supposed to be. The piece I’m printing has two lines on which I’m getting flecks of errant ink. The problem occurs no matter how much ink I have on the rollers, and the ink [...]

I’m rebuilding the gripper assembly on a very dirty SP-20. The pins are jammed in the holes due to the previous owner’s habit of just shooting WD-40 around the pins instead of lubricating them with graphite powder or grease. I’ve tried pulling them out, but they seem glued in there. I don’t think bent pins [...]

What do you think is the narrowest space that a Uni I could fit through without taking the press apart? I am looking for a house and this question came up. We like one house with a walkout basement but the doorway is only 31″ wide. Thanks for your input!

hi today i bought a vandercook universal II, serial no. 19742, im looking for the user manual , thepress is in very good condition . does this press have an adjustible hight, or should the hight for printing be adjusted in an other way documentation can be sent to mgerene@skynet.be first reaction i got from [...]