Uni 3 Roller Bracket

3 thoughts on “Uni 3 Roller Bracket

  • October 24, 2016 at 7:59 am
    Permalink

    Thanks to all who responded. We are content that some of the brackets are loose. But there is a consequence: when the rollers are removed and replaced, there is a chance that the bracket can slip down under the roller raising device, instead of being on top, as it should. Took me awhile to figure this out the first time it happened. Just a learning curve on a new press!

  • October 24, 2016 at 12:31 am
    Permalink

    The bracket is part X-16837. It’s only function is to lift the rollers and it sits on the roller bracket. I don’t think that it makes any difference if they are loose.

  • October 18, 2016 at 6:18 am
    Permalink

    I don’t think that there’s a name for this bracket. They’re not supposed to be loose, but most are. The easiest thing to do is squeeze a bead of Loctite behind the bend to prevent them from turning.

Leave a Reply