Would like to know if anyone as a similar press. I am ready to get the rollers recasted and i am a bit anxious about the proper diameter. My guess is 2 1/4 or 2 1/2.
The carriage set at the lowest setting is approx.: 1.9375 (height from the bed to the middle of the roller core).
The carriage set at the highest setting is approx.:
2.5 (height from the bed to the middle of the roller core).
The diameter of the ocillating roller is 1 5/16 a bit different from the 2 inches of the pre-1928-Composing Room Cylinders brochure.
Any ideas or infomation would be welcomed.
Alain
