Hi everyone. While restoring my no. 03 I noticed my bearings were a bit dry and you could feel the metal touching inside, which is, as I’ve been told a sign of the bearing being worn, or spent. So I decided to replace them, but to my surprise these are not standard bearings you get [...]

Hello everyone! I’ve undertaken the task of restoring my 03. I’ve started with paint thinner to degrease the bearings system where the previous owner had it all greased up, and thus it gather a severe amount of gunk. I disassembled the carriage and down to the impression cylinder. I’ve gotten most of the grime off. [...]

I am wondering about the impression roller (I don’t know if this is the right name) on this press. I’ve noticed that mine is a bit damaged, with some traces of scoring. I am worried this might cause uneven impression. Is this a roller that can be recovered or is this not a replaceable part? I [...]

Finally uncrated the Vandercook 01 I bought on the classifieds. Now to start cleaning.

I just purchased a Vandercook 099 Proofpress (http://vandercookpress.info/vanderblog/timeline/2/#099). It is in great working condition and has been well taken care of. I have experience with a Vandercook press but not this one. I have to ink the plate by hand and then place the paper on the form (it did not come with the optional [...]

The moniker “gravity press” refers to models 0, 01, 03, and 099, a group of small tabletop presses that were the simplest ones Vandercook built. The Impression cylinder rolls on the bearers (with bearings riding on the under rails), but are not geared, and do not have paper grippers, an inking assembly nor a motor. [...]

I have just acquired the above press, and am looking for people who have experience using one. The serial number is 8596. I want to use it for printing invitations and other small pieces. This is a tabletop, hand-ink press with a crank and a 16×21 bed. I cannot seem to find a visual of [...]