Good Day Vanderbloggers, I have recently acquired a “fixer-upper” UNI-1 needing everything related to the inking on the press including the drum, oscillating roller, rider and assembly, the form roller blocks, levers etc. I am looking for a parts machine (long shot) or will begin to fab what I need. I have contacted the usual [...]

press inspector’s name  on my Uni II also showing  the type height  the press is machined for

Hi All, I read the posts in the Vanderblog archives about SP15 ink drums wobbling because of a broken plastic gear or shorn off screws. Is it the same fix or different on a Uni 1 AB? On our Uni 1 AB, while printing we noticed that the lower steel ink drum was not inking [...]

I’ve been working on a thorough clean-up of my Uni I which was very grimy and dirty. I’ve already tore down and cleaned the adjustable bed which was frozen. That went smoothly thanks to the fine documentation from previous posts. Currently, I am dealing with a problem of immediately blowing a fuse when I put [...]

Hi all, Does anyone have, or now where I can track down a decal/sticker for my Uni I AB. The one I ma after is the oval one on the front left of the cabinet. Failing that has anyone evr produce a good high res bitmap or vector file of this decal that I can [...]

hi today i bought a vandercook universal II, serial no. 19742, im looking for the user manual , thepress is in very good condition . does this press have an adjustible hight, or should the hight for printing be adjusted in an other way documentation can be sent to mgerene@skynet.be first reaction i got from [...]

This Vandercook Universal III tower assembly is complete and in excellent condition. We have removed it to convert the press to hand cranked. This would be best used on a press which once had a tower but has had it removed, otherwise you will need to make slight modifications to your press to allow it [...]

I was using a friend’s Universal I press today when I noticed I was getting a lot of slurring and that the rollers weren’t rotating at all when I was printing or tripping. They were dragging across the surface of the plate without rotating. I looked up the manual and am wondering now if the [...]

I think this one set a new Vandercook record. $10,100.53 Looks like a nice press. I’d love to have that adjustable bed.

I am having an issue with our Uni I—it has a squeaky rider roller.  I took a look at an old post, ‘Inking Roller Squeal,’ and that was helpful, but I have an additional question.  The black knob at the end of the rider is loose, but when it is held in place, the squealing [...]

Dear Vandekin I am in Memphis cleaning & repairing two Vandercooks, a 4 and a Uni III. The operator of the III tells me the motor jumps (or rather jolts) itself randomly during a press run and there appears to be a little bit of slack in the chain. I tested it out and sure [...]

I scanned the assembly print for the Universal IV paper tower the other day for a customer and thought it may be of some interest. Though for the IV, it applies to the other Universals except for such things as tube length, shaft length, and the main spring (same in III and IV). These assembly [...]