<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Vanderblog &#187; Power Carriage</title>
	<atom:link href="http://vandercookpress.info/vanderblog/category/power-carriage/feed/" rel="self" type="application/rss+xml" />
	<link>http://vandercookpress.info/vanderblog</link>
	<description>A forum for all brands of flatbed cylinder proof presses</description>
	<lastBuildDate>Thu, 24 May 2012 14:56:06 +0000</lastBuildDate>
	<language>en</language>
	<sy:updatePeriod>hourly</sy:updatePeriod>
	<sy:updateFrequency>1</sy:updateFrequency>
			<item>
		<title>Vandercook Universal III adjustment help</title>
		<link>http://vandercookpress.info/vanderblog/2011/09/vandercook-universal-iii-adjustment-help/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=vandercook-universal-iii-adjustment-help</link>
		<comments>http://vandercookpress.info/vanderblog/2011/09/vandercook-universal-iii-adjustment-help/#comments</comments>
		<pubDate>Fri, 09 Sep 2011 11:48:35 +0000</pubDate>
		<dc:creator>itsfancy</dc:creator>
				<category><![CDATA[Adjustable Bed]]></category>
		<category><![CDATA[Bearers]]></category>
		<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Universal series]]></category>
		<category><![CDATA[cody langford]]></category>
		<category><![CDATA[its fancy letterpress studio]]></category>
		<category><![CDATA[vandercook universal III]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=8315</guid>
		<description><![CDATA[Here is a shot of my Universal III. I am trying to accomplish 2 things. 1. rollers are maxed out at their lowest point to ink the form I want to be able to have adjustment height. 2. Cylinder picks up ink on the trip back to the feedboard. I want impression without picking up [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2011/09/vandercook-universal-iii-adjustment-help/feed/</wfw:commentRss>
		<slash:comments>34</slash:comments>
		</item>
		<item>
		<title>Uni I &#8211; Power carriage stuck at feed board</title>
		<link>http://vandercookpress.info/vanderblog/2011/08/uni-i-power-carriage-stuck-at-feed-board/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=uni-i-power-carriage-stuck-at-feed-board</link>
		<comments>http://vandercookpress.info/vanderblog/2011/08/uni-i-power-carriage-stuck-at-feed-board/#comments</comments>
		<pubDate>Sun, 14 Aug 2011 20:04:54 +0000</pubDate>
		<dc:creator>Leslie Pearce</dc:creator>
				<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Universal series]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=8077</guid>
		<description><![CDATA[I&#8217;ve been having some inconsistencies with the braking and starting of my Universal I.  Dave Seat was here about a month and a half ago and made some adjustments to the microswitches to prevent the hard hitting at the feed board I was having (and more importantly showed me how to make proper adjustments).  Yesterday [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2011/08/uni-i-power-carriage-stuck-at-feed-board/feed/</wfw:commentRss>
		<slash:comments>5</slash:comments>
		</item>
		<item>
		<title>Vandercook Universal III Electrical Issues?</title>
		<link>http://vandercookpress.info/vanderblog/2011/07/vandercook-universal-iii-electrical-issues/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=vandercook-universal-iii-electrical-issues</link>
		<comments>http://vandercookpress.info/vanderblog/2011/07/vandercook-universal-iii-electrical-issues/#comments</comments>
		<pubDate>Fri, 08 Jul 2011 13:29:17 +0000</pubDate>
		<dc:creator>Nina Bell</dc:creator>
				<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Universal series]]></category>
		<category><![CDATA[Wash-up unit]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=7698</guid>
		<description><![CDATA[Hi all, Someone at Briar Press suggested that I post here since you are the Vandercook experts! As a new Vandercook Universal III owner, I’ve got a couple of issues going on that I’m hoping some of you can help me out with: 1. The power carriage seems to go out and back just fine [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2011/07/vandercook-universal-iii-electrical-issues/feed/</wfw:commentRss>
		<slash:comments>2</slash:comments>
		</item>
		<item>
		<title>Universal 1 Motor Questions</title>
		<link>http://vandercookpress.info/vanderblog/2011/04/universal-1-motor-questions/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=universal-1-motor-questions</link>
		<comments>http://vandercookpress.info/vanderblog/2011/04/universal-1-motor-questions/#comments</comments>
		<pubDate>Mon, 04 Apr 2011 07:56:59 +0000</pubDate>
		<dc:creator>Patrick Kavanagh</dc:creator>
				<category><![CDATA[Lubrication]]></category>
		<category><![CDATA[Motors]]></category>
		<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Universal series]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=7210</guid>
		<description><![CDATA[Hello all &#8211; In the middle of a big job this weekend, my Universal 1 Power started making a persistent new noise &#8211;something between a chatter and a squeak. The noise occurs as the carriage is moving, a little more on the return. The noise occurs whether the motor is driving the carriage or whether [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2011/04/universal-1-motor-questions/feed/</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>Universal III P just stopped</title>
		<link>http://vandercookpress.info/vanderblog/2010/12/universal-iii-just-stopped/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=universal-iii-just-stopped</link>
		<comments>http://vandercookpress.info/vanderblog/2010/12/universal-iii-just-stopped/#comments</comments>
		<pubDate>Sat, 11 Dec 2010 07:02:42 +0000</pubDate>
		<dc:creator>Ray Nichols</dc:creator>
				<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Universal series]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=6182</guid>
		<description><![CDATA[First, I&#8217;m looking for someone in the general vicinity of Delaware that can troubleshoot and possibly repair an automatic Vandercook Universal III. Know anyone? If not, is there some kind of electrician I might try contacting. Obviously, I need more than someone to hook up a 3-phase here. We were running our III the other [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2010/12/universal-iii-just-stopped/feed/</wfw:commentRss>
		<slash:comments>4</slash:comments>
		</item>
		<item>
		<title>Universal III Register Rack Question</title>
		<link>http://vandercookpress.info/vanderblog/2010/11/universal-iii-register-rack-question/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=universal-iii-register-rack-question</link>
		<comments>http://vandercookpress.info/vanderblog/2010/11/universal-iii-register-rack-question/#comments</comments>
		<pubDate>Sat, 27 Nov 2010 22:04:05 +0000</pubDate>
		<dc:creator>Ron</dc:creator>
				<category><![CDATA[Cylinder gears/racks]]></category>
		<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Restoration]]></category>
		<category><![CDATA[Universal series]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=6127</guid>
		<description><![CDATA[We are cleaning up a newly acquired UNI IIIP, and have noticed something which is disturbing. Under the register rack (X-2831), is a shim that looks approximately 2pts  thick and resides nearest the feed table. A smaller shim is at the end nearest the floating rack. We are assuming that these have been put in place to solve a [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2010/11/universal-iii-register-rack-question/feed/</wfw:commentRss>
		<slash:comments>5</slash:comments>
		</item>
		<item>
		<title>I locked up my Uni I</title>
		<link>http://vandercookpress.info/vanderblog/2010/10/i-locked-up-my-uni-i/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=i-locked-up-my-uni-i</link>
		<comments>http://vandercookpress.info/vanderblog/2010/10/i-locked-up-my-uni-i/#comments</comments>
		<pubDate>Sun, 24 Oct 2010 13:09:58 +0000</pubDate>
		<dc:creator>Leslie Pearce</dc:creator>
				<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Universal series]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=5786</guid>
		<description><![CDATA[I was running some small posters yesterday on my Uni I AB.  Things were going smoothly until the powered carriage was moving towards the end of the bed and got stuck midway.  It just stopped.  I run it pretty slowly so it wasn&#8217;t a very sudden stop it just was rolling along and then wasn&#8217;t. [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2010/10/i-locked-up-my-uni-i/feed/</wfw:commentRss>
		<slash:comments>6</slash:comments>
		</item>
		<item>
		<title>Universal I AB – Power Carriage Fuse Problem</title>
		<link>http://vandercookpress.info/vanderblog/2010/08/universal-i-ab-%e2%80%93power-carriage-fuse-problem/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=universal-i-ab-%25e2%2580%2593power-carriage-fuse-problem</link>
		<comments>http://vandercookpress.info/vanderblog/2010/08/universal-i-ab-%e2%80%93power-carriage-fuse-problem/#comments</comments>
		<pubDate>Sun, 22 Aug 2010 02:12:32 +0000</pubDate>
		<dc:creator>Kevin Rudynski</dc:creator>
				<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Universal series]]></category>
		<category><![CDATA[Blown Fuse Problem]]></category>
		<category><![CDATA[fuse]]></category>
		<category><![CDATA[Universal 1 AB]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=5180</guid>
		<description><![CDATA[I&#8217;ve been working on a thorough clean-up of my Uni I which was very grimy and dirty. I&#8217;ve already tore down and cleaned the adjustable bed which was frozen. That went smoothly thanks to the fine documentation from previous posts. Currently, I am dealing with a problem of immediately blowing a fuse when I put [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2010/08/universal-i-ab-%e2%80%93power-carriage-fuse-problem/feed/</wfw:commentRss>
		<slash:comments>5</slash:comments>
		</item>
		<item>
		<title>Uni III Power motor query</title>
		<link>http://vandercookpress.info/vanderblog/2010/01/uni-iii-power-motor/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=uni-iii-power-motor</link>
		<comments>http://vandercookpress.info/vanderblog/2010/01/uni-iii-power-motor/#comments</comments>
		<pubDate>Fri, 15 Jan 2010 04:04:55 +0000</pubDate>
		<dc:creator>Terrence Chouinard</dc:creator>
				<category><![CDATA[Motors]]></category>
		<category><![CDATA[No. 4 & 215]]></category>
		<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Universal series]]></category>
		<category><![CDATA["Universal III"]]></category>
		<category><![CDATA[clutch]]></category>
		<category><![CDATA[vandercook 4]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=3811</guid>
		<description><![CDATA[Dear Vandekin I am in Memphis cleaning &#38; repairing two Vandercooks, a 4 and a Uni III. The operator of the III tells me the motor jumps (or rather jolts) itself randomly during a press run and there appears to be a little bit of slack in the chain. I tested it out and sure [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2010/01/uni-iii-power-motor/feed/</wfw:commentRss>
		<slash:comments>5</slash:comments>
		</item>
		<item>
		<title>Uni-III Power carriage motor querie</title>
		<link>http://vandercookpress.info/vanderblog/2009/07/uni-iii-drive-motor-querie/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=uni-iii-drive-motor-querie</link>
		<comments>http://vandercookpress.info/vanderblog/2009/07/uni-iii-drive-motor-querie/#comments</comments>
		<pubDate>Fri, 24 Jul 2009 09:12:26 +0000</pubDate>
		<dc:creator>Steve Robinson</dc:creator>
				<category><![CDATA[Power Carriage]]></category>
		<category><![CDATA[Universal series]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=1784</guid>
		<description><![CDATA[[This post deserves a second look--PM] I have recently rebuilt a Uni-III Power and was perplexed when I could not satisfactorily adjust the &#8220;braking&#8221; of the carriage at either end of travel. I adjusted the clutch to book spec, checked the micro switches, contacts and rheostat, all were functioning properly. With no other known adjustment [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2009/07/uni-iii-drive-motor-querie/feed/</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>Vandercook 219 Power &#8211; 3 phase to Single Phase?</title>
		<link>http://vandercookpress.info/vanderblog/2009/07/vandercook-219-power-3-phase-to-single-phase/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=vandercook-219-power-3-phase-to-single-phase</link>
		<comments>http://vandercookpress.info/vanderblog/2009/07/vandercook-219-power-3-phase-to-single-phase/#comments</comments>
		<pubDate>Thu, 02 Jul 2009 14:12:06 +0000</pubDate>
		<dc:creator>Nicholas Wilson</dc:creator>
				<category><![CDATA[219 NS]]></category>
		<category><![CDATA[Power Carriage]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=1737</guid>
		<description><![CDATA[I recently purchased a Vandercook 219 power, and I&#8217;m weighing my options on switching it from 3 phase to single phase. Is it possible to switch out the motor to a single phase motor, or should I just go with a rotary converter? Thanks!]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2009/07/vandercook-219-power-3-phase-to-single-phase/feed/</wfw:commentRss>
		<slash:comments>2</slash:comments>
		</item>
		<item>
		<title>Power 219 Questions</title>
		<link>http://vandercookpress.info/vanderblog/2009/03/power-219-questions/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=power-219-questions</link>
		<comments>http://vandercookpress.info/vanderblog/2009/03/power-219-questions/#comments</comments>
		<pubDate>Tue, 31 Mar 2009 15:00:44 +0000</pubDate>
		<dc:creator>colleen walsh</dc:creator>
				<category><![CDATA[219 NS]]></category>
		<category><![CDATA[Buying & Moving]]></category>
		<category><![CDATA[Power Carriage]]></category>

		<guid isPermaLink="false">http://vandercookpress.info/vanderblog/?p=1537</guid>
		<description><![CDATA[Admittedly, I have no experience with Vandercook or any other flatbed presses. Currently I run a Windmill, C&#38;P and a Golding Jobber, but am looking to expand in size and versatility. I found a Power 219 for sale and was hoping that someone could give me some pointers on what to look for, and more [...]]]></description>
		<wfw:commentRss>http://vandercookpress.info/vanderblog/2009/03/power-219-questions/feed/</wfw:commentRss>
		<slash:comments>6</slash:comments>
		</item>
	</channel>
</rss>

