320G Carriage won’t stay in home position, rolls down bed

Hi all,

I’m teaching on a Vandercook 320G that is still relatively new to the school, and working on tuning things up. One of the main issues is that the carriage will not stay in its resting home position unless it’s held in place. After a print is pulled, upon returning to the starting point, the carriage wants to just roll back down the bed. A wooden prop currently keeps it secured when the press isn’t being used, but the whole setup doesn’t seem safe for the students.

I believe I’ve read previously about this being related to a bad spring on SP-series presses. I’m wondering if there’s a similar fix or solution for this 320G, and if (universal) parts may be available?

Any input is greatly appreciated. Many thanks!

320G Carriage won’t stay in home position, rolls down bed

One thought on “320G Carriage won’t stay in home position, rolls down bed

  • February 1, 2019 at 11:05 pm
    Permalink

    Instead of a spring for a latch as on several other models, the 320 has plates next to the bumper springs called brake wedges. They are likely worn in the middle. They could be copied by a machinist.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.