Vandercook No. 4 Steady Roller Issues

I’m restoring a No. 4 that’s in pretty rough shape. I noticed that the steady rollers do not have adjusting levers on either side. Additionally, when the carriage rolls down the bed, sometimes the steady rollers move laterally and in one case even fell out. I’m also having difficulty matching with the manual drawings with what I see. I would love some feedback on whether I have the correct steady rollers or whether somewhere along the way, incorrect rollers were added.

I’ve included pictures of what I’m seeing as well as a highlight from the manual for what I think I’m missing. I would like to be sure I order the correct parts from Fritz, so any guidance there would also be helpful.

What I’m seeing and which looks very different than the manual.

(Since I’m in the process of restoring, I’ve removed the form roller rack)

Thank you!

Jessica

Vandercook No. 4 Steady Roller Issues

3 thoughts on “Vandercook No. 4 Steady Roller Issues

  • April 28, 2020 at 8:21 pm
    Permalink

    This press with serial number 7588 was built in 1938 (https://vandercookpress.info/vanderblog/sn/).
    I have not checked when the engineering change was made from the small steady roller to the large one. It is likely noted on drawing MR-175 for the later Steady Roller. When I do I will add a note in a probable fourth edition of my book (2024).

  • April 27, 2020 at 6:46 pm
    Permalink

    Fantastic! What an easy solution. Thank you Paul. When you say this is an early design, can you give me a ballpark on the year. I know very little about this presses history. Thank you!

  • April 27, 2020 at 3:07 pm
    Permalink

    These steady rollers are and early design. Turning the slot in the bolt will turn the eccentric. If you don’t have a lock nut you can find on at a hardware store. Look for a low profile or thin nut. But these days it’s better to buy online. McMaster-Carr is my go-to supplier.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.