How do you print with gold paste?
I have old cans of VanSon Holiday gold paste and a can of gold paste from Cal/Ink. How do you print with these? Do you mix them with varnish or transparent base? Thanks.
When adjusting form rollers
When adjusting the height of inking rollers on a Universal I where in the bed of the press should the carriage be? And, should the press be in trip or print position?
Inconsistant inking on sheet
On my Vandercook Universal 1 the printing pressure at the bottom of the sheet releases (sometimes but not always) at 4 inches from the end of a 22 inch sheet causing the printing to be lighter. There seems to be
Vandercook #2 HELP
I have a Vandercook #2. It’s a very simple press. No inking and no grippers. The only parts that move as the cylinder goes down the bed are the roller bearings. I can move them with my hands but they
Packing
I have an Vandercook No. 2 press. Very simple no inking. For packing, the number on the cylinder says .105. This seems to be a fairly thick packing. I have some sheets I received from NA graphics but this adds
Best way to remove rust?
Hello, I have a Vandercook No 2 proof press. Very simple. No inking. Just a bed and a roller. It has some lite rust on the cylinder. What is the best way to remove this? Thanks, Laurie
Recent Comments