This page in development. These tables provide original equipment manufacturers specs for the most common models. Motor rebuilds with new bearings and windings are preferable to total replacements because the dimensions may not fit the allotted space and new units may not match original design specifications. Replacement options (and product urls) are subject to change by current manufactures. OEM still in business: Bodine, Century, Dayton (Grainger) and Reliance (Baldor). If you have information to add, please contact the moderator.
Ink Distribution Motors
|Models||Original Specs||Replacement Notes|
|SP15||Bodine: 1/12 hp|
|Baldor: #GP12514 1730 rpm + 10:1 gear reduction = 173 rpm. Gearbox shaft must be flipped before installed.
Speed Control Box #BC138 converts from DC to AC, set at 65% after install. Plug in resistor for the controller. Baldor #BR0180.
|Challenge 15 MP||Bodine: NSI-53R, 1/12 hp, 1725 rpm + 10:1 right-angled gearbox = 173 rpm||Bodine: #0623, 1/8 hp, 170 rpm
Bodine: #0624, 1/8 hp, 85 rpm
|Reliance: 1/12 hp, 1725 rpm + 15:1 ratio right-angled gearbox = 115 rpm||Pay particular attention to the motor size so that it fits the allotted space.|
|Reliance: 1/12 hp, 1725 rpm + 15:1 ratio right-angled gearbox = 115 rpm||Grainger: #6XJ21 1/4hp, 1725rpm + #4RN76 15:1 speed reducer + #6X499 mounting plate = 115rpm|
|These motors linked via belt to 15:1 speed reducer = 117 rpm|
Century: #CSH-65L-DKC3-3FA, 1/4 hp, 1750rpm
Claire Electric Co.: Type JS Model CR Serial 25
1/4 hp 125 rpm
Dayton: #5K460A, 3/4 hp, 1725 rpm
General Electric: #5K460A, 1/6 hp, 1140 rpm
|219 OS||Dayton: 1/4hp, 1725 rpm||Motor sits at bottom of cabinet. Space allows numerous replacement options.
|Reprex||Dayton: 1/10 hp|
Power Carriage Motors
|Models||Original specs||Replacement Notes|
|SP25||Reliance: 1/4-1/8 hp, 1475 rpm + 12:1 right-angled gearbox = 123-65 rpm||Reliance: 1/4-1/8 hp, 1475 rpm + 12:1 right-angled gearbox = 123-65 rpm
|Janette: 1/4 hp, 1725 rpm + 12:1 right-angled gearbox = 144 rpm|
Reliance: 1/8 hp, 2000 rpm + 12:1 right-angled gearbox = 170 rpm
Reliance: 1/4 hp, 1825 rpm + 12:1 right-angled gearbox = 152 rpm
|Janette was acquired by Leeds & Northrup which was was acquired by Honeywell who discontinued this product line.
I wish to thank: Lad Boyle, Melanie Finlayson, Katie Harper, John Henry, Erin Maurelli, Carl Mario Nudi, May Sorum, Amanda Thomas. Table Press plugin by Tobias Bäthge.