I have noticed a problem with my UNI III Power slowing down and not running to the end of the bed after 40 or so impressions. I thought it might be an electrical problem, but went through all the electrical troubleshooting I could, and no joy. So I took a look at the clutch. It […]
MoreAuthor: John Henry
“Spring Cleaning”
I thought I’d give my Universal III a good cleaning after it had sat idle for a good deal of the winter while doing some home remodeling. I started out cleaning out the gear racks and noticed that the carriage latch was pretty loose and no spring tension. I pulled it off and found the […]
MoreInk Drum Bearing Replacement
Somehow the wooden ink drum bearing on the operator side of my Universal III managed to work itself loose and ended up inside the drum, leaving the drum loose on that end of the shaft. I managed to remove the wood composition bearing from another spare ink drum I had and pressed it onto the […]
More