Yup, lucky me! I found one in a tin barn in the northern Catskills. It needs some love, but after half a day with penetrating oil, Simple Green, scotch pads, wire brushes and q-tips, etc., the drum turns over and the motor whirs; the press is level and the bed is clean. The belt for […]
MoreMore TagTag: paint
Re-assembling a No. 4 – getting ready to paint
Hello everyone. I’m pretty close to completion of my No. 4’s restoration and I’m very eager to have it ready to start printing on January, at the latest February. I was reassembling the Non-Operator side last night, trying my hand at it, and I thought everything should go smoothly since I took the time to […]
MoreMore TagRestoring a Vandercook 03 [updated]
Hello everyone! I’ve undertaken the task of restoring my 03. I’ve started with paint thinner to degrease the bearings system where the previous owner had it all greased up, and thus it gather a severe amount of gunk. I disassembled the carriage and down to the impression cylinder. I’ve gotten most of the grime off. […]
MoreMore Tag