Hello! I’m having a challenge with our SP20. When checking / setting the roller height at different points (as the carriage travels from end-to-end), when the press is in ‘Print,’ the roller height changes. Specifically, when the carriage is closest to the feedboard and moving forward for about 10 – 12 inches, the roller height […]
MoreAuthor: Nick Shick
Vandercook SP15, lowering gear side of rear form roller
The gear side of the rear roller on our SP15 will not lower enough to hit a roller-setting gauge. It does have a range of motion, just will not descend low enough to contact the gauge on the gear side. The roller measures about 1/8″ less than 2 1/2″ in diameter. The tip diameter of […]
More