We have recently begun having an intermittent problem with our SP-15. After printing, when the cylinder is returning to home position, it hits some obstruction about 12″ away from the feed board that causes a jolt and a significant bang. It doesn’t do this all the time (maybe 1 in every 4-5 print passes), and […]
MoreCategory: Cylinder Eccentric
Vandercook 4 Cylinder Problem
Hello, I recently bought a Vandercook 4 from the Hick’s Bros. Everything seems like it’s in working order except the cylinder needs to be adjusted – the rail on the operating side is bearing down hard and there’s a gap on the non-operator side where you can see daylight between the rails. I think as […]
MoreHand gripper redux
Goudy said: “The old fellows stole all our best ideas.” Proving it again is this No.4 with a custom-made hand activated gripper bar, similar to the idea for a No.3 discussed on this forum Summer ’08 (archive links here and here). The pedal and chain linkage are still intact, but don’t work, I was curious […]
More