My sp-15 started squealing today; I deduced the noise was coming from either the motor or the ink drum assembly – inspected the motor oil reservoir and topped it up without overfilling. Moved onto the ink drum assembly x 20613 and on removal found the ink drum shaft to be very resistant to rotation. I’ve […]
MoreAuthor: john christopher
Centenary bundle
I’ve just put my contribution on flickr and thought it would be great if others could upload theirs to show the great un-washed masses what a super project it was…
MoreCreasing/Die-cutting on a Vandercook?
Alot of cutting and creasing in the UK seems to be done on Heidlebergs – I haven’t got one of those, so my question is this: does any one use their Vandercook for cutting and/or creasing and if so what do you use? For cutting I assume you would pack/protect the cylinder from the die […]
MoreRubber feet pads
In the Vandercook sp-15 manual it states the press should be set on synthetic rubber pads – with packing in order to correct any unevenness. Does anyone use these pads, if so what are they like – their depth for example – I can envisage something like a mouse mat. John Christopher
MoreSp15 Motor and Ink Drum Unit
On the sp15, the motor unit and ink drum are held under the press bed within a unit mounted on two pivots. Two springs create tension on the unit enabling it to spring back up after the impression cylinder has travelled over it. What I want to know is how ‘springy’ this assembly should be […]
MoreVandercook centenary
Given that next year 2009 is the Vandercook centenary I thought the occasion could be marked in some way – so I thought I’d get the ball rolling – there would appear to be 1011 presses out there at the last count, I wonder how many owners would consider a joint project where each would […]
MoreVandercook & Sons Metal Fabricating Pin Punch
I spotted this on ebay “370033826590”:http://cgi.ebay.com/VANDERCOOK-SONS-METAL-FABRICATING-PIN-PUNCH-CHICAGO_W0QQitemZ370033826590QQihZ024QQcategoryZ104238QQrdZ1QQssPageNameZWD4VQQcmdZViewItem?_trksid=p1638.m124 – somebody might be interested – what is it? John arcane devices
Moresp-15 another part identification required
can anyone tell me what other parts would be required to make the sheet finger operate – view the parts i have on “flickr”:http://www.flickr.com/photos/8286330@N03/ thanks again! john christopher arcane devices
MoreSP-15 for sale in Brooklyn
Noticed this on the Briar Press website – is this being sold by anyone on here? [ Link invalid ] best john christopher
Morebroken spring on an SP-15
hi all I’m calling on the fount of collective knowledge here with a technical question. I’m refurbishing an sp-15, and as I was cleaning up the underside of the cylinder carriage I noticed that a rocking lever arm (what is I assume part of the trip mechanism) was sprung with a flat spring on one […]
More