Hi all – I’m in the last stages of cleaning up my Vandercook and I did what I told myself I never would. I ended up with 4 bolts and 8 washers that I cannot for the life of me figure out where they go. I’ve looked over the press and also the schematics and […]
MoreMore TagAuthor: oddpilotpress
Installing New Rollers — Clutch Pin Issue
While installing new rollers on the #4, I ran into an issue where the threaded pin (MR-109) won’t pass through the new clutch pin (MR-110) once in the roller. Separately, all the parts fit together just fine. Once on the roller core, the threaded pin will pass through the holes in the clutch block (MR-108), […]
MoreMore TagNo. 4 Drive Chain
I’m slowly making progress on cleaning up my No. 4 and the other day I ran into a strange issue. Hoping others can shed some light on the situation. After re-timing the carriage I noticed it wouldn’t return all the way to the feed board. It seemed like the trip wedge wasn’t being pushed out […]
MoreMore TagMoving a No. 4, Some Disassembly Required
I’m getting ready to have my No. 4 moved, and unfortunately the riggers are saying it will require some disassembly. The plan is to remove the carriage, then the bed, and then treat the cabinet as a separate piece (drawers removed of course). I’m familiar with most of the tips to remove the feedboard, handles, […]
MoreMore Tag