Hello. I have been searching tirelessly for a Vandercook Proof Press (preferably #3 or #4, Universal or SP) in working condition to purchase for use in a printing job I am working on. I would greatly appreciate and advice or suggestions that I can get to help me find one. Thank you.
MoreMore TagCategory: No. 3
Sleeve attachment for hand-activated grippper bar
This post related to Hand gripper lever for a No. 3. –PM: Here’s a quick sketch. I don’t have a #3 around me, but if the Gripper Trip Lever is anything like a #4 or an SP-20, you can undo the top 2 screws and let it swing free, slide the tube over, and reassemble.
MoreMore TagHand gripper lever for a No. 3
Here’s an idea for a hand-activated gripper lever to aid sheet feeding on the No. 3 Vandercook. In the drawing at left, a handle attached to the gripper trip lever is pulled toward the operator, thus moving the push rod against the trip bar which forces the gripper stems to rise. A notable “feature” of […]
MoreMore TagVandercook #3 Oscillating roller
I am in the midst of restoring a Vandercook #3 and am in *big* need of an oscillating roller. I understand this is a hard piece to come by (given that it is usually sold w/ the press itself). But if anyone could further help or direct me in this search, I would be grateful. […]
MoreMore TagThe Arm’s Vandercook #3 on eBay
In order to make room for a new press I have listed The Arm’s Vandercook #3 proof press on eBay. Starting bid is $1. This press is missing its inking roller setup and would have to be inked with a brayer, but it should prove to be a good deal for someone printing monotypes or […]
MoreMore TagDoes anyone need a new bed plate?
I am about to have replacement bed plates made up for both of my Vandercook 320Gs and my #3 and will have enough of the .050″ cold rolled steel to make one extra bed plate. Would anyone like to buy one for either of these presses? The price will be fair. Contact me for details. […]
MoreMore TagVandercook No. 3 Carriage Help
Hello. I recently had my Vandercook No. 3 overhauled with a new paint job. While the press looks beautiful, the carriage with the cylinder no longer “locks” in place. I think something mechanical was painted over that should not have been, so if anyone has any suggestions about which part on my press is affected, […]
MoreMore TagCleanup??
As some of you are aware, I recently hauled my No. 3 from the eastern shore of Maryland to my new home in Kentucky. Having thanked my lucky stars that the truck did not tip over (more on this in a later post), I am now faced with trying to restore my beautiful beast. Overall […]
MoreMore TagNo. 3 sheet delivery tray
I am on the lookout for a sheet delivery tray. I am not in a rush, but if one of you comes across a stray or extra, please let me know. Thank you. Chris
MoreMore TagSeeking some inking parts for the new #3
I picked up this Vandercook #3 (serial 13165) a few days ago and am interested in tracking down the parts it is missing. The press seems to have been partially disassembled to replace the rollers and the associated parts were lost before it was put back together. Here is a list of what I am […]
MoreMore TagGalley Height?
I recently purchased a Vandercook #3. I have used Vandercooks in the past but it has been some time. I was struck by the phrase “galley height” and was wondering what it means exactly. The information that I have found on this press refers to a bed plate that comes with the press. I will […]
MoreMore TagNew Owner
I am a new member of this blog and not very savy in the digital realm. I have come into the care of a VC # 3 with the serial # 8126. I am completely flumoxed by the very thorough cross referenced numbers and dates that Paul has collected. I hope to find the manufactured […]
MoreMore Tag