SOLD ! A beautifully maintained example of the Vandercook classic. Go to SP20 to get the actual specs, but suffice to say, you can print large format work with ease on this awesome press with motorized inking system. The rollers are brand new, never-been-used from Ramco, the motor is in excellent working condition. A lock up […]
MoreAuthor: Eugene Marino III
Gummy SP-20 rollers
After acquiring, I did a thorough clean-up the ink rollers on my SP-20. That was months ago, and they have remained somewhat gummy, tacky to the touch. At first I thought it was due to the humidity, but that’s no longer an issue. They were pretty crudded up & I gave them a good scrubbing […]
MoreGripper Assembly for SP-20
The foot pedal/gripper assembly on my recently acquired SP 20 is not functioning properly. The foot pedal seems to engage the gripper mechanism when manipulated by hand, but does not lower and return to its position as it should. Left to its own devices, it sits on the floor (see pic). Also, the rear assembly […]
MoreSourcing a steel bed plate
Other than a junkyard, does anyone have any idea where to source a .050″ cold-rolled steel bed plate to obtain type height on a galley-height press? Thanks for any assistance.
MoreLubricating bearing rails
Sorry if this has already been covered, but what is the best lubricant to use on the cylinder bearers and the rails? Thanks for any help.
MoreHelp ID parts from Vandercook No.2
Can anyone help identify these unattached parts that came along with my Vandercook 2 acquisition? #1 appears to be a scraper of some kind. The “blade” looks replaceable & is not sharp. #2 is a thin gauge painted metal plate with a bit of a lip or maybe paper guide along one edge, and a […]
More