Sorry to start a new post on this topic but could not successfully add a photo to previous comments. I have the new rollers back on the press. They are still showing the same problem of streaking ink, but it seems somewhat less extreme this time. The front roller is taking the ink better than […]
MoreAuthor: fhpress
SP-15 Trip Spring
I’ve just been searching online and found the info. here on the Vanderblog regarding trip spring installation. Will keep working on it again today.
MoreSP-15 Trip Spring replacement advice needed
I recently posted about a problem I was having with new form rollers, and was just about to get back to dealing with that yesterday when a broken trip spring stopped me. It’s been awhile since I needed to replace one of these, but I have done so in the past without much issue. One […]
MoreProblem with new rollers
I recently sent out an extra pair of SP-15 cores to be resurfaced. On receiving the new rollers, I transferred over the roller blocks/bearings and adjusted the height, but the rollers are not taking the ink well, it is streaking as if the rollers were skipping over the drum (the ink coverage on the drum […]
More