I am trying to figure out what press this tympan clamp bar comes from. It doesn’t fint my SP-15, the Uni I has a slotted bar, and it is too short for the Uni III. Any ideas? It is 14 inches long, the outer pins are 11 1/2 inches on center, and the innermost two […]
MoreAuthor: The Arm
Does anyone need a new bed plate?
I am about to have replacement bed plates made up for both of my Vandercook 320Gs and my #3 and will have enough of the .050″ cold rolled steel to make one extra bed plate. Would anyone like to buy one for either of these presses? The price will be fair. Contact me for details. […]
MoreChallenge proof press for sale in Brooklyn
I am listing this for a local printer that is soon to vacate his shop. The press has an oscillating bed and requires the form to be put in a chase and inked with a brayer. It would probably be best for those who work with wood type or mounted linoleum. I suspect the seller […]
MoreIn need of some side guide parts & info…
I finally have found a side guide for the last of the seven Vandercooks here at The Arm, but it appears to be missing some pieces. I am not very familiar with this style of side guide so can anyone tell me (or show me) what it is that I am missing? I think this […]
MoreReciprocating bed on a Vandercook?
In this photo from a Vandercook & Sons exhibit at the American Photoengravers Association convention there is a press shown with a reciprocating bed. Is this in the era of the Hacker buyout, or did Vandercook make a press with a travelling bed? Daniel Morris The Arm Letterpress Brooklyn, NY
MoreVandercook Electric Galley Proof Presses – For Sale in Chicopee, MA
John Barrett at “Letterpress Things”:http://www.letterpressthings.com/ is trying to find a home for a Vandercook 22 and an HS27. The 22 needs some work and new rollers, but the HS27 is in great shape and probably ready to run. The price is negotiable on both of these. These presses do not have gripper bars so the […]
MoreHelp ID these Vandercook? mystery inking parts
Dylan Fareed and I went out to visit John Barrett at Letterpress Things today and he asked me to drag some proof press roller assembly parts back to The Arm to attempt to identify them. I think the second one is a 219 rider roller assembly, but I have no clue on the rest. Anyone […]
MoreSeeking some inking parts for the new #3
I picked up this Vandercook #3 (serial 13165) a few days ago and am interested in tracking down the parts it is missing. The press seems to have been partially disassembled to replace the rollers and the associated parts were lost before it was put back together. Here is a list of what I am […]
MoreUniversal III Under Power!
A video… This is the most recent press to cross the threshold at The Arm. It didn’t take too much fiddling to replace the microswitches across the back of the press, clean out the control box and get it cycling back and forth, but it is pausing for a full five second count at the […]
MoreUniversal III Feedboard and Bed Extension
My manual for the Universal III shows that it was available with either a 42 inch or 30-inch feed board. Both of my Universal IIIs have the longer one, but also have a bed extension at the far end of the press bed. This makes the press awkwardly long and difficult to get around in […]
MoreReplacement feed board edge for Universal III
I am preparing to have a few of these aluminum feed board edges made up by a machinist. Does anybody else need one? So far I think its Bryce Knudson and myself. And Fritz- did you need one for that press out back? The ruled guide next to the slot in which the side guide […]
MoreOriginal Universal I/III Knobs Available
I have a few extras of the original knobs (complete with insert and set screws) for the control panel on the Universal I and III power carriage presses. If you are missing a knob or have a damaged one let me know. I could sell them, but would prefer to trade for any of these […]
More