Hi All, I have a 215 and some lines of text are showing up with a ‘shadow’ or blurry around them, as the attached photo shows in the ‘we have reserved’ line. I’ve wiped the plate down, cleaned it, checked my rollers, everything I can think of. It seems to just be random lines on […]
MoreCategory: No. 4 / 215
Vandercook No 4 Steady Roller
During an oiling and maintenance session on our Vandercook No. 4, I noticed what I believe to be with a problem with the Steady Roller (part MR-175 on sheet no. 106 of the manual). After rolling the cylinder to the end of the bed, the Steady Rollers hang over the end of the bed. When […]
MoreVandercook 4-T for Sale in Brooklyn, NY
I’ve closed up my letterpress studio after 10 years in business and have a wonderful, ready-to-print Vandercook 4-T to part with. I’ll consider any and all reasonable offers. Please be in touch with any questions: maggie@campbellrawpress.com Details as follows: ——– The press is currently in my studio on Bergen Street in Brooklyn, NY. A bit […]
MoreNo. 4: Form Roller Gear Separation Chatter
I want to apologize in advance as I do not know all of the technical names for each part and piece of the machine but I do feel like my thinking is on the right track. Please let me know your opinion on my issue. Thanks! Last night I came into the shop, a […]
MoreSOLD! Vandercook #4: $13,000.00 SOLD! Press On.
For sale is our beloved Vandercook #4. It is hard to say goodbye to this great press, but life changes mean it is time to find a new home. I have given this press a lot of love and cared well for it over the years. Its great for stationery, greeting cards, and also posters […]
More#4 Light Bulb?
Does anyone happen to know the specification for the Vandercook #4 power ON light bulb? I’ll use the trial/error method, but I thought I’d ask here. Thanks! Matt
MoreNo. 4 Print/Trip Assembly
I just started working with a friend’s No. 4 press. It prints great and seems like a really solid machine. The machinery used to lower the impression cylinder from trip to print during the print stroke then back up to trip for the return to the feed table seems very different compared to the SP […]
MoreVandercook 4 bed height issue
We are still working on getting our 4 up and running. On first attempt at adjusting the rollers, we were able to get the adjustment screws to lower the rollers to type high on the operator side of the carriage, but the other side will not lower enough to touch the roller gauge. The gears […]
MoreVandercook 4 Gripper Pedal problems
I have just acquired a Vandercook 4 and am working on getting it in printing shape. As it sits, the pedal-operated grippers aren’t working properly. The pedal, in its resting state, is pretty low to the ground, making it impossible for the chain to pull far enough to open the grippers. When I push on […]
MoreVandercook 4T Roller Issue
I have a Vandercook 4T press here in Prague. Now after 5 years of not being used (here in Prague – it could have been unused for longer than that), I have decided that I should give it a go. I had to change the plug, but all seems to be working fine, apart from […]
More#4 Drive Belt Replacement
I’ve replaced the MM144 drive belt on my #4 and adjusted the motor mount to accommodate it. My question is: What is the proper belt tension? How do I how measure and adjust it accordingly? Thanks! Matt
MoreNo. 4 Uneven Inking on Rider Rollers
Hello all, I’m trying to troubleshoot an inking problem on my Vandercook No. 4, Serial No. 14509. I’m finding that my rider rollers (the small steel rollers front and back) are not getting inked evenly. (See image, the front rider roller is not completely inking towards the right side) When I roll the cylinder down […]
More