Hi All, I have a Universal I with adjustable bed – and need to move it into my studio. We haven’t been able to get the handle off … spent a day on that :( …. seized pin.So – we are now considering taking off the carriage. Does anyone have advice? I assume I need […]
MoreMore TagUniversal III grippers
Hello all,I am new to the forum.I have 2 Universal III presses under my care and I am cleaning and refurbishing both.The grippers on one press are not opening at the feed board in run mode and the cycle button does not work at all.It seems an intermittent problem.I am replacing fuses and just noticed […]
MoreMore TagSP20 Issue After Print
Hi all, I’m working with an SP20 and after I run through a print to the end of the bed and roll back to the feed board I hit some resistance about 6 inches before returning the cylinder the entire way back. Here is a video: IMG_0760 I’ve checked the screws and bolts I can […]
MoreMore TagNo. 4 Jumps
Our No.4 has a inking issue at approx 4 inches into the roll forward. what happens is a slight “jump” is felt and a faint reduction in inking of the plate for approximately 1/64th or smaller. results in a line that appears on the printer piece in the form of a lighter print. I have […]
MoreMore TagWhere’s R.O.?
Fritz Klinke asks: Can you spot R.O. Vandercook? Oakland Auditorium, home to 57 Grateful Dead concerts, also showed printing stuff. Probably 1920s. (Courtesy of NA Graphics)
MoreMore TagVandercook 215 Switch Replacement
The old switch fell back into the box. It was being held in place by a metal clip on the frame, shown here on the wood feed-board of the press. I could not get it to grab the switch, so I figured I would just replace it with a household switch, but am unclear about […]
MoreMore TagFlat Bars in Cylinder on a Vandercook No. 2
When I acquired this No. 2 many years ago, an offset printing blanket (the press was being used for perforating/cutting prior to my getting it) was clamped between or under these flat bars. I replaced the blanket way back when and took these bars off and used the square cinching bars to tighten the blanket. […]
MoreMore TagSP-20 Taper pins in ink system lever bar
I’m in the process of putting back together a heavily desconstructed SP-20 #29569. I suspect (pictured top) these are taper pins that connect through the rod (picturesed 2nd) that raises and lowers the ink system. The pins are pretty stuck in place, so before I put a ton effort into trying to loose them, I […]
MoreMore TagWTB: Vandercook 325G Form and Distribution rollers
Hello Vandercook Party People. I am looking to buy the form roller assembly, form rollers and distribution rollers for a Vandercook 325G. If you have any laying around I’d love to get my hands on them to get this big beast of a press I bought back up and running! On another note. I bought […]
MoreMore TagVandercook No 4 Delivery Tray
Hello Vandercookers. I am restoring a No. 4 and need a delivery tray made. I have one to copy. I was wondering if anyone else out there is missing one and would like one made? Between time and materials I’m guessing these will be about $200-250 bucks plus shipping if you want one. Obviously the […]
MoreMore TagVandercook Employee Handbook
These pages from the Vandercook [Employee] Handbook No. 2 (ca. 1949) shows that the company provided good benefits. This copy belonged to David D. Vandercook. See also this recruitment flyer.
MoreMore Tagpainting a press
My Vandercook 4 looks scruffy and having moved it to a part of the house where it is visible to everyone, I would like to paint it. I wonder if there are any do-s and don’t-s about this. And although I have seen these presses painted in various colors, I wonder if there is a […]
MoreMore Tag