Can someone tell me about the characteristics and specs of a “tindeck blanket,” the original packing specified for the impression cylinder of my No.2 Proof Press, according to the model description on the vandy site. Just curious, never having come across one. Thanks, Duncan Dempster Honolulu, Hawaii
Morecylinder gear tooth alignment
After reading the previous discussion about a misaligned cylinder causing the grippers to smash the form, I thought about the SP20 I’m currently going over (and on which we have not yet printed) and noted that when I received it, the gripper bar was not at 12 oclock when the cylinder was home at the […]
MoreVandercook 4 problem
I have printed a couple of projects on a Vandercook 4 that a friend recently purchased. I have had to put 4.5 picas of furniture in back of the deadline bar because if I were to put type or engraving at the deadline bar (without the furniture) it would smash. With the furniture in, this […]
MoreGrippers snap closed when cylinder is at feed board…
I am trying to work out the quirks in one of my 320G presses and the thing that is bothering me the most is that the grippers are closing when the cylinder reaches the feed board. The gripper pedal won’t open them at this point. The gripper bar stops at the proper vertical orientation, but […]
More232P Parts and Maintenance Manual Wanted
Either xerox or pdf form. We would be happy to pay for any expense. Pleas email me at : typenut[at]bcglobal.net charles
MoreNo. 4 Manual
Does anyone have access to a Vandercook proof press #4 operations manual or some such directions on the press’s operation. Also who is a good supplier for photopolymer plates for this press? Thanks, Bosco Bob
MoreNew Owner
I am a new member of this blog and not very savy in the digital realm. I have come into the care of a VC # 3 with the serial # 8126. I am completely flumoxed by the very thorough cross referenced numbers and dates that Paul has collected. I hope to find the manufactured […]
MoreVandercook Grey Paint
I am preparing to repaint one of my Universal IIIs and am trying to come up with a suitable paint that I can apply without having to haul it to a painter. On letpress Greg Fischer suggested brush painting with Rust-Oleum Professional High-Performance Enamel “Smoke Gray”, but I would prefer to use spray cans in […]
MoreNo.4 Cylinder Engineering Print
Fritz sent me this drawing of a No.4 cylinder showing its position at the feed board. It is posted for the benefit of Klu, and other tenacious individuals who dare to restore long-abandoned presses from which lesser mortals would have walked away. –PM The excerpt below was originally posted 10-11-06 by Paul Moxon on “PPL”:http://groups.yahoo.com/group/PPLetterpress […]
MoreManual for Uni I (#20234)
A few years back, a manual was ordered by Mass Art (where I teach) for our Universal I. When I opened it to find the part number for the spring plunger, I could not find the part. Our Uni I is an earlier model from what I can tell from the serial number chart. Do […]
MoreFeedboard Feedback
Ok, maybe not the most consequential Vandercook query, but this has been nagging at me. I’m currently fixing up my departments’ recently salvaged SP20 (serial #25595), and have noticed that the feed board is ungraduated along the slot which holds the edge guide (missing, of course). In contrast, my SP15 has the customary scale for […]
MoreID this proof press!
A fella in Panama City, Florida has offered this press on the Briar Press classifieds site, but can’t find any info on it. The third picture I found in an article online and is of a similar press, but it made no mention of what it was. Does anybody know? Daniel Morris The Arm Letterpress […]
More