My Universal I Power Test Press is having trouble with its manual/cycle controls. It only works in “manual” mode, so I can only move the carriage using the reverse/off/forward lever. If I move the selector switch to “cycle” and press the start button, nothing happens. The photo shows the controls on my press. The manual/cycle switch […]
MoreCategory: *Model
No. 4: Form Roller Gear Separation Chatter
I want to apologize in advance as I do not know all of the technical names for each part and piece of the machine but I do feel like my thinking is on the right track. Please let me know your opinion on my issue. Thanks! Last night I came into the shop, a […]
More219 Power AB: Conversion to Manual
Hi everyone, I have a 219Power AB and would like to figure out the simplest way to convert it to manual. I’ve sourced a carriage handle and am planning to have an adapter fabricated to attach the handle to the stub end of the carriage rod, but my question is aimed at the least-intrusive way […]
MoreRoller height issues on Universal III
I just got brand new rollers and cores. The weird thing is that when I check my roller height, it’s not even throughout. The ends are the same but the middle of the roller has a thinner stripe when I check. Is it the gauge I’m using? That’s steel but I’ve heard that those can […]
MoreClutch Drive Adjustment Instructions Position
I have a powered Uni-I, and my Clutch Drive Adjustment instruction plaque has come off, can someone tell me which way it should be mounted on the drive side cover? Should it be right side up when on the operator side, or on the drive side?
MoreVandercook Dollie Design
I’m going to build a couple of dollies on this plan for our studio so we can move stuff around with a toe jack. This is designed for our Powered Uni 1 with adjustable bed, so it’s not necessarily universal, though it should also work with the No. 3. The procedure is to first block […]
MoreUniversal III pedal sticking + carriage stopping
The pedal on the press is sticking, I figured the grippers needed to be cleaned so I took that assembly apart and cleaned it, and the pedal is still sticking. Not sure what to do!! In another unrelated note (or maybe it’s related, who knows!), every so often, the carriage just stops for a second […]
MoreSOLD! Vandercook #4: $13,000.00 SOLD! Press On.
For sale is our beloved Vandercook #4. It is hard to say goodbye to this great press, but life changes mean it is time to find a new home. I have given this press a lot of love and cared well for it over the years. Its great for stationery, greeting cards, and also posters […]
MoreUniversal I carriage “skipping”
Well, after 25 years of printing on Vandercooks, I encountered a new problem today. There is a 1/2″ strip across the whole sheet that is not printing with the correct impression. It is illogical, but it seems that the carriage raises up just for that line of type and then goes back down. The press is […]
MoreUniversal III Gripper Assembly Cleaning
Hi–I’ve taken apart the gripper assembly to give it a good cleaning. In the past I’ve used Simple Green to soak everything and loosen the grime and then used a toothbrush to get in all the nooks and crannies, etc. Graphite to lubricate and then I put it all together again. BUT this time, I’m […]
More#4 Light Bulb?
Does anyone happen to know the specification for the Vandercook #4 power ON light bulb? I’ll use the trial/error method, but I thought I’d ask here. Thanks! Matt
MoreImage Stretching Issue
I’m trying to get familiar with the use of my Vandercook 3, and doing a lot of troubleshooting and question asking. I’ve made a couple of reduction prints on it so far (using lino blocks mounted to MDF and adjusted to type high with paper sheets as I look for a galley height bed plate) […]
More