This is my first post. I went through the pictures on the Vandercook web site and the proof press we have looks like the 11×25 1/2 Trip Action Vandercook Proof Press. I am a 4th generation printer in Cincinnati OH. Would anyone venture a guess at the value of this press. Thanks for your answer, […]
MoreCategory: *Model
Changing Tympan Paper
Can anyone give me some tips or point me towards a good resource for learning how to change the tympan paper on the roller of the good ole’ No. 4? It’s worn down quite a bit, and it also needs a bit less packing as the impression I’m getting is too deep. Thanks!
MoreSticky Grippers
I have a problem with sticky grippers on my SP-15. Everything was working fine, then they became stiffer and stiffer until they didn’t want to open at all. As far as I can tell the foot pedal assembly is fine. I’ve taken apart the gripper assembly, cleaned and lubricated it. While it seems to work […]
MoreSP-15 squeak problem
My SP-15, now in full use for several months, has a squeak in the area of the operator’s side of the carriage which I can’t seem to locate precisely or get rid of. The noise occurs mid-way in travel down the bed, and happens only when on print, not on trip. I routinely oil all […]
MoreVandercook #3 Oscillating roller
I am in the midst of restoring a Vandercook #3 and am in *big* need of an oscillating roller. I understand this is a hard piece to come by (given that it is usually sold w/ the press itself). But if anyone could further help or direct me in this search, I would be grateful. […]
MoreMoving an SP20 Upstairs
New poster, long time lurker. So, we run a silkscreen shop in Columbia, SC call The Half and Half. I learned how to use C&P clamshells at school, and later traveled to Hatch Show Print to learn their Vandercooks. We want to expand our abilities to letterpress, and I have a lead on a few […]
MoreAdjusting Form Rollers without Gauge
My Uni I came to me without a roller setting gauge. Is it possible to get one, and if so, how? If (as I suspect) they’re vanishingly rare, can you recommend method for setting the height of the form rollovers without one? Thanks!
More232P conversion to M a success!
Our machine shop added two gears and linked them together. The link can be seen in the picture with yellow handle (to the right of the handle). The reason for the link is that the cylinder shifts position and gear and the handle needed to shift with it. It takes five and a half rotations […]
MoreBargain Uni I on eBay
Saw this press listed on eBay and what a deal! I wonder what the bidding will go up to… http://tinyurl.com/2g96mw Daniel Morris The Arm Letterpress Brooklyn, NY
Morevandercook sp-15 bearing and bed bearers problem?
I have had a lot of slurring today that I have not been able to get rid of no matter what I try. The ink looks really uneven too. I have brand new rollers and printed 2 jobs last weekend that were perfect. Nothing is different today except that my print looks horrible. After a few […]
Morestopping oscillation of roller on SP-15?
Hi there, Does anyone know how to temporarily stop the oscillation of the oscillating roller on an SP-15? I have a project I’m hoping I can do a blending technique with, and I was thinking it would go much easier if there’s an easy way to stop the oscillation of that top roller. The area […]
MoreVandercook 4 pulley and belt
Hi all. I used my Vandercook 4 successfully for about a month, then began hearing a clanking sound behind the belt guard, which turned out to be the upper pulley rubbing against the guard. When the motor is on, the belt gradually moves toward the operator side of the pulley, then starts to move off […]
More