I found this advertisement and saw the row of Vandercooks, they look like “32-28’s”:https://vandercookpress.info/years35-53.html#32-28.
MoreCategory: *Model
Vandy art
Here is a nice illustration of a No. 4 Vandercook, with a split vibrator and riders, featured in a two page ad for ink manufacturer Interchemical Corporation. (The Inland Printer, September 1953, p.24-25, from the library of Fritz Klinke). Is anyone familar with the pen-stick ink applicator shown?
MoreForm roller pins on a No. 4
 Here is the drawing for the form roller pins on a No. 4, along with a photograph of the pins on my unit. Are the pins supposed to be as round as the drawing shows? In other words, is it time I had my pins replaced? Thanks, Barbara
MoreForm roller clutch on a No. 4
Hello. I am a newbie restoring a No. 4. I have cleaned all of the moving parts and am putting everything back in place. When I turned on the motor for the first time and lowered the oscillating and form roller assemblies, I noticed a faint clacking sound that didn’t seem right. I turned off […]
MorePower grippers on Universal Series…
I understand that there is an option for the powered Universal series presses in which the powered grippers would raise and close without having to press on the foot pedal. How is it activated? Where can I find blueprints or technical operating manuals (more detailed) of the Uni presses? Thank you once again!
MoreLubricating the gear teeth on the Vandercook No. 4 impression cylinder
Hello. I am a newbie in the process of restoring a Vandercook No. 4, SN 18794. My husband, who was in aerospace mechanical engineering for many years, is providing advice and much moral support. He was surprised when I told him that the procedure for lubricating the impression cylinder gear teeth was to apply a […]
MoreDoes anyone need a new bed plate?
I am about to have replacement bed plates made up for both of my Vandercook 320Gs and my #3 and will have enough of the .050″ cold rolled steel to make one extra bed plate. Would anyone like to buy one for either of these presses? The price will be fair. Contact me for details. […]
More219 Old Style Feedboard
I am restoring a 219 OS and am missing the metal feedboard lip and side guide. I’m trying to research all of my options. I was hoping someone out there may have an extra one? Any suggestions for alternatives? I’ve been in contact with Fritz and he is going to look for the blueprints. Ted […]
More219 Oldstyle Gripper Problem: too tight a grip
The 219 OS I’ve been using has developed a terrible problem, which started about 6 months ago, and nothing I do seems to help. The grippers raise fine, but when depressed into the paper to HOLD the paper,the grippers clamp down very hard, MUCH harder than is needed to just hold the paper in position […]
MoreVandercook No. 3 Carriage Help
Hello. I recently had my Vandercook No. 3 overhauled with a new paint job. While the press looks beautiful, the carriage with the cylinder no longer “locks” in place. I think something mechanical was painted over that should not have been, so if anyone has any suggestions about which part on my press is affected, […]
MoreSP15 in Sacramento
I was wasting time and noticed this in California. Notify your friends or get yourself another press. How about number ?? Daniel? [ Link invalid ] Chris
MoreIn need of some side guide parts & info…
I finally have found a side guide for the last of the seven Vandercooks here at The Arm, but it appears to be missing some pieces. I am not very familiar with this style of side guide so can anyone tell me (or show me) what it is that I am missing? I think this […]
More