5 thoughts on “Looking for SP-15 roller cores

  1. Nathan Rose - August 16, 2011

    I have a form roller assembly from what i think is an SP-15. Both cores, with old rubber on them, plus the blocks, gears, and set-screws. In fine condition as far as I can tell. I can take a closer look later today, and try to get a parts number/photo for you. They were stashed in the drawer of my #4 when i got it, and I don’t foresee needing it.
    Let me know if you’d be interested.

  2. Enrique V Woolfolk - August 12, 2011

    Thanks Jonathan. I did. I’ll wait for his answer, then.

  3. Jonathan Selikoff - August 12, 2011

    You might want to email Fritz (NA Graphics) directly. He often has stuff that isn’t listed on the site.

  4. Enrique V Woolfolk - August 11, 2011

    Thank you, Thomas. I had been on the NA Graph website before, but all I could find was the SP-20 Cores.

    “Vandercook SP-20 Form Roller Core”

    Are these the same cores for the SP-15 ?

    Thank you.

  5. Thomas Hardjono - August 11, 2011

    If you are looking for new cores, NA Graphics sells them:


Leave a Reply

Copyright © 2022 vandercookpress.infoTheme by SiteOrigin
Scroll to top