Hello everyone, I’d like your input please. I need to know… Is NevrDull abrasive? I know their website says it’s not abrasive, but, does it remove steel from surfaces? I read somewhere, some time ago that whenever your cleaning fabric turns gray it means that there’s metal being removed. Also.. Is a Nylon scouring pad […]
MoreAuthor: Enrique
Bearings on a No. 03
Hi everyone. While restoring my no. 03 I noticed my bearings were a bit dry and you could feel the metal touching inside, which is, as I’ve been told a sign of the bearing being worn, or spent. So I decided to replace them, but to my surprise these are not standard bearings you get […]
MoreReel rod
Is it possible to remove the reel rod on the No. 4 ? I want to get in there real good with a brush, it’s nasty in there. I found two hex nuts and tried both ways but couldn’t get it out. I also unscrewed the ratchet but I can’t see how the reel rod […]
MoreSP-15 movement and balance
Hi everyone, First of all, sorry for the long post. Second: I’ve noticed something on my SP-15 but I do not know if this is supposed to happen or not. I noticed this first when I took off the motor cover to clean up in there. The whole part moves as you will see in […]
MoreSP-15 Oscillator
Hi everyone, I am still looking for an oscillator for my SP-15. Does anyone have one lying around gathering dust? or know of some one who does? Please contact me if you do. Thanks a lot.
MoreRoller bearing blocks position, nyliners and spring
Hi everyone, Looking at photos of other sp-15s I noticed that my press came with the spring pulling on a different piece than it should. Is this (2nd photo) the right arrangement? My press is the first photo. Also, my bearing blocks are obviously wrong, I will change them tomorrow. I also want to know […]
MoreRestoring a Vandercook 03 [updated]
Hello everyone! I’ve undertaken the task of restoring my 03. I’ve started with paint thinner to degrease the bearings system where the previous owner had it all greased up, and thus it gather a severe amount of gunk. I disassembled the carriage and down to the impression cylinder. I’ve gotten most of the grime off. […]
MoreMoving a Vandercook SP-15, No. 4 and No. 03
Ok. I won’t tell the whole story to not bore you but very shortly: SP-15 moved by the sellers, no hassle, 30 min. job. 2 men needed. No. 4 moved by printing equipment sellers. From a metal shop to my studio. Big big hassle, no moving equipment or tools whatsoever, except some pipes and pieces […]
MoreTwo Vandercook presses spotted online for sale
In case anyone is interested and had not seen them. A no.1 http://www.ebay.com/itm/Vandercook-proof-press-No-1-stand-accessories-/320747732206?pt=LH_DefaultDomain_0&hash=item4aae0dfcee#ht_500wt_1297 And an SP-15 http://www.ebay.com/itm/Vandercook-SP-15-LETTERPRESS-proof-press-/110734059775?pt=LH_DefaultDomain_0&hash=item19c843a8ff#ht_9561wt_1282 I wonder what the going price will be on each.
MoreVandercook 03 – Impression roller and bearings
I am wondering about the impression roller (I don’t know if this is the right name) on this press. I’ve noticed that mine is a bit damaged, with some traces of scoring. I am worried this might cause uneven impression. Is this a roller that can be recovered or is this not a replaceable part? I […]
MoreLooking for SP-15 roller cores
Hi everyone. First post here. I am looking for at least one SP-15 roller core. If anyone has any to spare that would like to sell, please let me know. Thank you very much in advance.
More