Hello All, In a few days we’ll be sending out the cores for our SP15 and SP20 form rollers to be recast. Would it be a good idea to have them recast at a slightly larger diameter (perhaps 2.51 inches for the SP15 and 3.01 inches for the SP20) to make them last a little […]
MoreCategory: General
How Best to Clean Dried Ink Buildup on Ink Drum
I’m cleaning up a Uni-I AB, and there is quite a bit of hard, dry ink build up around the ink drum. I tried chipping at it, but I don’t want to accidentally scrape the drum. Is the best course of action to remove the drum? Is that tricky? I don’t see an easy way […]
MoreSequence of printing events…
I’m wondering if the following sequence of events seems unreasonable to get a very, very clean print on a Universal III. The project is an important certificate for a major university signed by the president and all. This is essentially for the text part of the certificate, not including the recipient’s name. Printing area is […]
MoreChallenge vs. Vandercook Proof Press
If given the chance, would you prefer: Challenge Proof Press Model 1418E or 1926 Vandercook Model 21 Roller Series ???
Morepaper supplies
what is a good resource for paper? i’m looking for paper suppliers that sell paper and cardstock for letterpress, offset printing, book binding, and packaging. any good websites come to mind?
MoreUni I manual follow up
Hi Folks , Many thanks to all who responded to my earlier post. I have found some of the gripper bar parts, and have been told that there may be others somewhere in a garage of a previous owner so I’m chasing that up before committing to a newly fabricated one. I’ll post a picture […]
MoreUni I manual
Hi folks, I have just acquired a very sad Universal I AB which from a first look is missing a few parts. I am hoping to get it back in good order but really don’t know how I will even be able to make a start without a reasonably detailed manual. Is there such a […]
MoreCleaning a 325G
Hi All I’m cleaning up my 325G and noticed someone had painted the Bed, Bearers and Racks. Will that affect printing (packing, etc.) and is it necessary to strip it all down to bare metal? If so, can anyone advise on the best and/or least toxic way to go? Thanks for any help! Steve
MoreDoes anyone have a good copy of an original Vandercook sp-15 manual?
I just received the one that I ordered from NA graphics, and it’s really hard to see the images. Does an original exist? A high quality scan as opposed to a xerox?
MoreMy first SP-15…
Hello, fellow printers. After years of searching for an SP-15, I’ve finally acquired one from Kurt Hansen in Auburn, California. It has been sitting for some time, however, and needs some service before it’s ready to roll. Though I am familiar with the operation of the press, I am not trained in how to restore […]
MoreWorkshops in the UK!!! Who’ll have me?
I am happy to announce that I’ve been chosen to receive a Fulbright award to study Book Conservation at West Dean College in West Sussex England. I’ll be studying for two years, beginning September 2010. Community engagement and cultural exchange are integral parts of the Fulbright program, and accordingly I am looking to conduct free […]
MoreInconsistent print quality
I’m sorry for having problems two days in a row, but here’s another phenomenon that I’m not understanding. These two drop caps (48-point Rondo) were printed one after the other – same lockup, same ink, same paper, same packing, same everything – yet the print quality is markedly different. What could have made the difference? […]
More