I’ve got a Vandercook 4 trip problem. I’ve checked out the other two threads I can find on this topic here, and they don’t quite answer my question. I’ve checked the bolt on the pivot point that is hidden behind the sheet metal, and it seems to be tight. The trouble is with the lift […]
MoreLooking for some advice/ thoughts
Hello all, I was wondering if you would give me your thoughts and advice on an Vandercook 15-20 press. I talked to the gentleman selling the press and he seemed to think that grippers and a feedboard could be added to this press so it would have printing capabilities. He did mention that it does […]
MoreSP15 Carriage is tough to roll
Hi all, Over the last few months it seems that the carriage of my SP 15 has become more and more difficult to roll down the press bed. In both trip and print modes, the carriage seems heavy. I recently compared the action on my press to another SP 15, and the difference was noticeable; […]
MoreNot sure what type of press this is?
I recently became an owner of a C&P “new style” press & cutter, however this much smaller (press?) came with it too. There isn’t a serial number or any marks on it. It looks pretty old to me, but I’m not even sure if it’s a press for type? Any answers or ideas would help. […]
MoreNeed a big press
I’m looking for a printer with a press that can handle a 29″ x 29″ letterpress plate in order to print on thick sheets of calfskin parchment. I am not a printer and I’m confused by all of the various machines. It looks to me like Vandercook didn’t make a press large enough for my […]
MoreVandercook press census
Aloha Paul. Sorry it took so long to respond. As to the census, please list my name as Doug Hylin from Kings Beach, CA. Thanks! More updates to follow soon I hope!
MoreMoving a Vandercook SP-15, No. 4 and No. 03
Ok. I won’t tell the whole story to not bore you but very shortly: SP-15 moved by the sellers, no hassle, 30 min. job. 2 men needed. No. 4 moved by printing equipment sellers. From a metal shop to my studio. Big big hassle, no moving equipment or tools whatsoever, except some pipes and pieces […]
MoreVandercook #4 for sale in MD- SOLD
UPDATE: The press is sold, and on its way to a happy new home in California. ___ Vandercook #4, serial 7594. Available in MD. Call for more details. See here for more info about this model of press: https://vandercookpress.info/vanderblog/timeline/3/#4
MoreSP-15 Cylinder Carriage Bearings Issues
I undertook the arduous task of adjusting the 6 cylinder carriage bearings on my SP15, after still experiencing uneven inking and impression with newly recovered rollers. Thanks especially to Gerald’s comprehensive “Adjusting Cylinder Carriage Bearings” article, without which I never would have undertaken the ordeal: https://vandercookpress.info/vanderblog/articles/lange-adj/ And with Fritz’s recently found comments within Paul’s “Common […]
MoreSP-15 Motor Noise
Our newly acquired SP-15 has a very loud motor. Not sure if this is normal. We have a second SP-15 that is also loud, but not as bad as the newer one. I sometimes have to shout for my students to hear me. I received several suggestions to check/add oil, and we did that, but […]
MoreNeed a positive lockup bar for a Vandercook SP-15
Hi all, I live in France and here it is very hard to find specific material for my Vandercook Sp-15 . I search : – a Vandercook SP-15 positive lockup bar – a Vandercook roller setting gauge If you have an extra one that you are willing to sell, please contact me. Any help advice, […]
MoreRemoving the inking drum on a Uni 1 ?
Hello, Has anyone replaced the wooden bearings on the inking drum of a Universal 1 press?, I noticed some side to side play in the inking drum awhile ago and ordered replacement wooden bearings from N.A. Graphics. But I was unclear on how to remove the inking drum and ended up leaving it as was […]
More