Hi, I have a No. 3 (Old Style), and I am planning on fabricating a gripper bar lever for it and I wanted to see if anyone else would want one as well. The more that are made at one time the cheaper they should be, but they definitely should be under $100. The idea […]
MoreMore TagCategory: Accessories
FOR SALE: Vandercook Universal III, C&P Pilot, Challenge Cutter & More
We at Tweedle Press have moved on to greener pastures and although we are reluctant to part with our beloved equipment – we feel certain that they would be happier to be used more often. See below for a list of the major pieces we are selling out of our house in Woolwich, Maine (about […]
MoreMore TagNeed a positive lockup bar for a Vandercook SP-15
Hi all, I live in France and here it is very hard to find specific material for my Vandercook Sp-15 . I search : – a Vandercook SP-15 positive lockup bar – a Vandercook roller setting gauge If you have an extra one that you are willing to sell, please contact me. Any help advice, […]
MoreMore TagBunting Base(s) and Uni III
Hi – We have a MB 811 Bunting base and looking at alternatives to get a larger form for posters, Etc. Has anyone purchased a custom built base to accommodate such endeavours? We have not priced the alternatives, but we are wondering if this is a good approach or if one should acquire a few […]
MoreMore TagCreasing/Die-cutting on a Vandercook?
Alot of cutting and creasing in the UK seems to be done on Heidlebergs – I haven’t got one of those, so my question is this: does any one use their Vandercook for cutting and/or creasing and if so what do you use? For cutting I assume you would pack/protect the cylinder from the die […]
MoreMore TagGalley Magnets
Does anyone know where to find galley magnets? Here are a couple of photographs of one magnet that I have, which is very handy, and I’d like to get my hands on some more of these. Jason _____________________________ Jason Dewinetz www.greenboathouse.com/dewinetz
MoreMore TagRubber feet pads
In the Vandercook sp-15 manual it states the press should be set on synthetic rubber pads – with packing in order to correct any unevenness. Does anyone use these pads, if so what are they like – their depth for example – I can envisage something like a mouse mat. John Christopher
MoreMore TagVandercook & Sons Metal Fabricating Pin Punch
I spotted this on ebay “370033826590”:http://cgi.ebay.com/VANDERCOOK-SONS-METAL-FABRICATING-PIN-PUNCH-CHICAGO_W0QQitemZ370033826590QQihZ024QQcategoryZ104238QQrdZ1QQssPageNameZWD4VQQcmdZViewItem?_trksid=p1638.m124 – somebody might be interested – what is it? John arcane devices
MoreMore TagSeeking Frisket Tower for Universal I
I am interested in finding a frisket tower for my Vandercook Universal I. I think a lot of people take these things off, but I like them. Does anyone know of one that might be available for sale? Thanks, Daniel Morris The Arm Letterpress Brooklyn, NY
MoreMore TagImprovised photopolymer bases
I was recently asked about a homemade photopolymer base I use at The Arm and thought it would be of value to post the reply here where it might be of use to others. “The base you saw at The Arm was an acrylic base with an aluminum surface laminated to it. It works okay, […]
MoreMore TagIn need of some side guide parts & info…
I finally have found a side guide for the last of the seven Vandercooks here at The Arm, but it appears to be missing some pieces. I am not very familiar with this style of side guide so can anyone tell me (or show me) what it is that I am missing? I think this […]
MoreMore TagNo. 3 sheet delivery tray
I am on the lookout for a sheet delivery tray. I am not in a rush, but if one of you comes across a stray or extra, please let me know. Thank you. Chris
MoreMore Tag