Vanderblog stalwart Eric Holub sent these photos of the cylinder trip rack on his 325G to help Kyle van Horn solve his alignment problem. The first pair shows the rack in trip (whole assembly, then close-up) and the second pair shows it in print (whole assembly, then close-up).
MoreMore TagCategory: 320/325
325 Mis-alignment question
Happy New Year all — I have a question for the masses – I’ll try to keep this concise. The shop I work in has a 325 that has forever seemed to have issues. We solved it various ways – extra packing being one, realizing it needed a bed plate was another (that helped!). We […]
MoreMore TagDoes anyone need a new bed plate?
I am about to have replacement bed plates made up for both of my Vandercook 320Gs and my #3 and will have enough of the .050″ cold rolled steel to make one extra bed plate. Would anyone like to buy one for either of these presses? The price will be fair. Contact me for details. […]
MoreMore Tagmissing parts from my 320
I have a disassembled 320 who’s missing a few parts. I have no idea where they went to, probably some sculpture kid ran off with them. Anyway, as I see it I have 3 options. 1] find replacement parts from a scrap press 2] machine new parts based on actual pieces or plans 3] sell […]
MoreMore Tag320G beginning to rust
please, if you have a moment to offer some instruction. I have a vandercook 320g sitting in a cold barn. I just noticed that it has begun to rust. What can I do to save it????? Madalyn Roxbury, NY
MoreMore TagSeeking Vandercook Side Guide x 2
I have been trying for a while to find an old-style Vandercook sheet side guide for one of my 320Gs and also one of the newer ones for one of my Universal IIIs. If anyone has a spare they could sell or happens to know where I might be able to find one it would […]
MoreMore TagGrippers snap closed when cylinder is at feed board…
I am trying to work out the quirks in one of my 320G presses and the thing that is bothering me the most is that the grippers are closing when the cylinder reaches the feed board. The gripper pedal won’t open them at this point. The gripper bar stops at the proper vertical orientation, but […]
MoreMore TagAnybody using 320G/325G with auto sheet feed?
Hello, I have a 320G press (#17096) set up with the optional auto sheet feed and was wondering if anyone was using one of these presses. I am looking for replacement rubber tapes for its sheet advance mechanism and have yet to find a source. Any ideas? Any tips on working on this press from […]
MoreMore Tag