I’m attempting to remove the hardware from my SP20 roller cores to ship them off to be recast. I’ve removed the tiny set screw from inside the larger, outer, screw on the end of the roller, but now I can’t seem to remove the larger, outer screw. I don’t want to turn it too hard […]
MoreCategory: *Model
Larger Images Posted of SP15 Sales Ephemera
A request was made via email for larger images than those I previously posted to the Flickr Vandercook group of the ephemera I received with my SP15 no. 23339. I’ve just completed uploading massive original scans to replace the measly ones previously posted. http://www.flickr.com/photos/interrobang918/375450973/in/photostream/ Perhaps they can be of some use, though I believe I […]
MoreMystery SP15 spare parts
The previous owner of my SP15 left a small bag of spare parts in the cabinet, I post a photo below. The springs at top left are straightforward, the bottom left piece appears to be a damaged wiper spring, the piece above it a leftover trip spring but the 2 pairs of flat bars and […]
More
SP15 “bearer controlled form roller support system” + nylon wipers
I’m hoping to clarify a few SP15 related mysteries. Apologies in advance for the multiple reference photos….
MoreRecasting Rollers
Hello All, In a few days we’ll be sending out the cores for our SP15 and SP20 form rollers to be recast. Would it be a good idea to have them recast at a slightly larger diameter (perhaps 2.51 inches for the SP15 and 3.01 inches for the SP20) to make them last a little […]
MoreSP-15 carriage problem
We have recently begun having an intermittent problem with our SP-15. After printing, when the cylinder is returning to home position, it hits some obstruction about 12″ away from the feed board that causes a jolt and a significant bang. It doesn’t do this all the time (maybe 1 in every 4-5 print passes), and […]
MoreVandercook 3 Proof Press
Does anyone know if a Vandercook 3 Proof Press is galley high or type high? Serial # 7617. Also, what is the exact size of the steel sheet that comes in the bed? I want it to be able to fit in the bed (inside the lock up bar). I have tried printing without this steel […]
MoreModel 4 packing question
Hi, I have the press basically back together and I’m starting to get things reset so that I can start printing. Some quesitons on how to do a few things: 1. How can I determine the amount of packing needed on the roller [impression cylinder]. 2. inking rollers that are on the oscillating roller group […]
More15-20 at Auction
Another press on Bidspotter.com this month that I’ve been repeatedly asked about is a Vandercook 15-20 Dry Offset press. Dry offset refers to the absence of water in the inking system. The process is used to print plastic containers and lids, cosmetic tubes, aluminum cans, etc. Dry offset ink is cured onto the substrate using […]
MoreRocker at Auction
Several people have written to me about the Vandercook to be auctioned later this month on Bidspotter. This press, Vandercook’s first production model, is a circa 1909 Trip Action High Side Arm Press aka the Rocker. (Vandercook didn’t stamp serial number into their presses until 1914 and it’s not known how long the Rocker was […]
MoreRider Roller on SP15
Hello All, I’m working on cleaning up an SP15 that hasn’t been touched in maybe 30 years. I have all the rollers lubricated and in their right places (as far as I can tell) but when rolling the carriage down the press bed, the rider roller isn’t moving. It almost seems as though it’s a […]
More#4 Rider Bushing Replacement
Hello all. I was fortunate enough to attend Paul’s workshop in Chicago last week and learned a great deal, but the one thing I was unable to retain is what exactly the process is for fixing these missing (broken?) bushings in my riders. As I understand it, there are taper pins holding the assembly together, […]
More