Hello everyone. I’d really appreciate it if someone could take the time to give me the exact length of an SP15 oscillator and the steel rider. I appreciate your responses in advance. Enrique
MoreInvitation, “Homegrown Alphabets” – BookWorks
Deadline for Entries – March 15, 2013 Homegrown Alphabets is an exhibit intended to showcase the exciting ways in which type design and printing come together to form refined letterforms as well as wildly experimental letterforms. Homegrown Alphabets will be on exhibit in the BookWorks Gallery, May 1 – June 30, 2013 We’re seeking type […]
MoreAsbern vs Vandercook
Hello I’m a graphic designer in Spain. I’m planning on setting a press here. I’ve been offered an Asbern AD1 and a Vandercook Universal I. The Asbern is cheaper but I don’t really know if the Vandercook is much better, if it’s really worth paying more. As you can see, I have no experience in […]
MoreModel ID
Hi everyone. I’m new to the forum, and new to letterpress as well. I’ve taken a couple classes, and have had the press in the pictures above for years. I’ve got tons of questions about maintenance, but I’ll start with help in identifying this model. It’s a truss proof press, and the only number I […]
MoreSP25 Carriage Misalignment
I am in the process of getting our SP25 up and running and the first order of business is realigning the cylinder carriage so that the grippers are at the “12 o’clock” position when at the feed board. Does anyone have any suggestions of the best way to adjust this? During a class with Paul […]
MoreVandercook 219os upper roller assembly weight/hack
I’ve discussed my frustration with adjusting the rollers on the 219os many times in many places, perhaps even here, perhaps in person (or via email) to some of you. For those unfamiliar, the upper roller assembly, which is comprised of the oscillating roller an two rider rollers, sits on top of the lower roller assembly […]
MoreWhat does this do?
Hello everyone, I’d like to know what this part does, the one that moves horizontally, and has a spring. I noticed that the small knob on the right “locks it” in place when it’s retracted, but does not unlock automatically. So.. my question is. Is something wrong with my SP15?
MoreRattling Rollers
I was operating my Vandercook 320 and all of the sudden, the metal rollers began rattling out of control either while in print or trip mode. The rollers are shaking about so much that they’ve even been tossed off of the rubber roller carriage at times. I’ve tried oiling the press, tightening screws, but nothing […]
MoreImpression Issue
Hoping there is a simple solution to my impression problem. I’ve had my Vandercook No. 4 for several years now and this problem just started happening on my last job. It seems to me that the impression cylinder is dropping into impression mode later than it ought to be. Rather than the typical 3 1/2 […]
MoreGripper Assembly for SP-20
The foot pedal/gripper assembly on my recently acquired SP 20 is not functioning properly. The foot pedal seems to engage the gripper mechanism when manipulated by hand, but does not lower and return to its position as it should. Left to its own devices, it sits on the floor (see pic). Also, the rear assembly […]
MoreUniversal I Moving Tips
Hey Folks, I was wondering if anybody has some good tips about moving a press (the UNI I above) from a second floor? I’m in the process of getting a quote from a crane service, but I fear the price is going to be a lot more then I can afford right now. I’m wondering […]
MorePress for sale in Belgium
A complete printshop for sale in Belgium: http://www.drukwerkindemarge.org/vandercook-219-pers-toebehoren/
More